Wavetronix SmartSensor 105 (SS-105) - User Guide Instrukcja Użytkownika Pobierz pdf (Strona 96)

APPENDIX  SMARTSENSOR 105 USER GUIDE 95

GND/-DC

(Black 1 & Black 2)

+DC

(Red 1 & Red 2)

+485

-485

CTS

RTS

Ground

(Red 3)

(Black 3)

(Red 6)

(Black 6)

(Red 4)

(Black 4)

(Drain 1)

(Drain 2)

(Drain 3)

(Drain 4)

Figure B.2 – Old SmartSensor Cable into the Click 200

Appendix C – Cable Lengths

e recommendations in Table C.1 below allow you to provide reliable power to the Smart-

Sensor. e SmartSensor cable’s red and black wires provide a 20 AWG wire pair. e other

pairs on the SmartSensor cable are 22 AWG and are normally used for communication.

Cable Gauge 24 Volts 12 Volts

20 AWG (8-conductor Cable) 600 ft. (182.9 m) 110 ft. (33.5 m)

Additional 22 AWG Add 400 ft. (121.9 m) Add 75 ft. (22.9 m)

22 AWG (9-conductor Cable) 400 ft. (121.9 m) 75 ft. (22.9 m)

Additional 22 AWG Add 400 ft. (121.9 m) Add 75 ft. (22.9 m)

14 AWG 2500 ft. (762 m) 450 ft. (137.2 m)

12 AWG 3900 ft. (1188.7 m) 700 ft. (213.4 m)

10 AWG 6000 ft. (1828.8 m) 1050 ft. (320 m)

8 AWG 9900 ft. (3017.5 m) 1750 ft. (533.4 m)

6 AWG 14,000 ft. (4267.2 m) 2500 ft. (762 m)

Table C.1 – Maximum Cable Length for Power

If the cable length is longer than 600 ft. (182.9 m) when operating at 24 V, it is possible

to increase the maximum cable length by wiring a pair of lines normally used for RS-232

communications with the red and black wires.

1 2 ... 91 92 93 94 95 96 97 98 99

Brak uwag

Wavetronix SmartSensor 105 (SS-105) - User Guide Instrukcja Użytkownika Strona 96